Drill Chuck Arbor- Taper Shank Arbors
| esp | Espigas de sujeccion | fr | Arbres Porte – forets | de | Kegeldorn |
Description
Description
This Drill Chuck Arbor is used to adapt drill chuck to your drill press, milling machine or lathe for chucks with Jacobs taper backs.Â
 Determine both shank size (to fit into your Drill Press,tailstock, etc.) & chuck (Jacobs) taper to order the correct arbor. Morse Taper to Jacobs Taper arbors have a tang end.
Simrantools International manufactures the following types of arbors:
- Jacobs drill chuck Arbors
- Taper Shank Arbors
Drill chuck arbors specification
- Precision Ground to Master Gauges.
- Guarantee finest possible accuracy & fit.
- As well as Individually packed.
- Moreover Available in Soft Type & Fully Hardened Type.
- Sizes of jacob chuck arbors and morse taper arbors , mentioned in the table
| ITEM NO. | MORSE TAPER SHANK | JACOB BACK TAPER | ITEM NO. | MORSE TAPER SHANK | MORSE TAPER SHANK |
|---|---|---|---|---|---|
| SDA-0055 | 0 | 0 | SDA-0075 | 2 | 33 |
| SDA-0056 | 0 | 1 | SDA-0076 | 3 | 1 |
| SDA-0057 | 0 | 2 | SDA-0077 | 3 | 2 |
| SDA-0058 | 0 | 3 | SDA-0078 | 3 | 3 |
| SDA-0059 | 0 | 6 | SDA-0079 | 3 | 4 |
| SDA-0060 | 0 | 33 | SDA-0080 | 3 | 5 |
| SDA-0061 | 1 | 0 | SDA-0081 | 3 | 6 |
| SDA-0062 | 1 | 1 | SDA-0082 | 3 | 33 |
| SDA-0063 | 1 | 2 | SDA-0083 | 4 | 2 |
| SDA-0064 | 1 | 3 | SDA-0084 | 4 | 3 |
| SDA-0065 | 1 | 4 | SDA-0085 | 4 | 4 |
| SDA-0066 | 1 | 6 | SDA-0086 | 4 | 5 |
| SDA-0067 | 1 | 33 | SDA-0087 | 4 | 6 |
| SDA-0068 | 2 | 0 | SDA-0088 | 4 | 33 |
| SDA-0069 | 2 | 1 | SDA-0089 | 5 | 2 |
| SDA-0070 | 2 | 2 | SDA-0090 | 5 | 3 |
| SDA-0071 | 2 | 3 | SDA-0091 | 5 | 4 |
| SDA-0072 | 2 | 4 | SDA-0092 | 5 | 5 |
| SDA-0073 | 2 | 5 | SDA-0093 | 5 | 6 |
| SDA-0074 | 2 | 6 |
