Long Drive Pin Punch 8″ – Heavy
esp:- Batadores Cilindricos fr:- chasse-goupilles de:- splinttreiber
Description
Description
Drive pin punch, used to dislodge rivets and pins. In other way, pin punches are used for driving pins into or out of a workpiece.Each punch has the size stamped on the head.
These round shank pin punches have clean and well cut knurling which provides positive, non slip grip.
Pin Punch 8″ (200 mm) long:
Two piece construction with a 3.3/4″ (90 mm) long pin. The two piece construction allows the pin to have a separate hardness from the body which prevents “peening” and also ensures complete straightness over such a long length.
Drive Pin punch specification
- Drive Pin Punches made from Tool Steel, Hardened
and Tempered. - Knurled body for easy grip and avaiable in black oxidised finish.
- Total length 8″
- Body length 4-1/2″ and Drive Pin Section length 3-1/2″.
- Available in individual sizes and also in a set of 5
in attractive plastic pouches.
| ITEM NO. | SIZE OF TIP | BODY DIA. | TOTAL LENGTH | |||
|---|---|---|---|---|---|---|
| SSR-3391 | 3/32" | 2.4 mm | 3/8" | 9.5 mm | 6" | 150 mm |
| SSR-3392 | 1/8" | 3.2 mm | 3/8" | 9.5 mm | 6-1/4" | 160 mm |
| SSR-3393 | 5/32" | 4.0 mm | 3/8" | 9.5 mm | 6-1/4" | 160 mm |
| SSR-3394 | 3/16" | 4.8 mm | 3/8" | 9.5 mm | 6-1/4" | 160 mm |
| SSR-3395 | 7/32" | 5.5 mm | 3/8" | 9.5 mm | 6-1/2" | 165 mm |
| SSR-3396 | 1/4" | 6.3 mm | 3/8" | 9.5 mm | 6-3/4" | 170 mm |
| SSR-3397 | 5/16" | 8.0 mm | 1/2" | 12.7 mm | 7" | 175 mm |
| SSR-3398 | 3/8" | 9.5 mm | 9/16" | 14.3 mm | 7" | 175 mm |
| SSR-3399 | Set of above said 8 Parallel Pin Punches - Short Reach | |||||
