Center drills are used to produce a centre hole on a workpiece for turning between centers .That is, they provide a location for a (live, dead, or driven) center to locate the part about an axis. In other words Combined drills and countersinks, commonly called centre drills.
Further, our team of experienced testers test these drill on various quality parameters. With this in mind , The prices of the offered drills are set according to the market standards.
Features:
ITEM NO. | DIA. BODY | DIA. PILOT | TOTAL LENGTH |
---|---|---|---|
SCD-1961 | 1/8" | 3/64" | 1-1/4" |
SCD-1962 | 3/16" | 5/64" | 1-7/8" |
SCD-1963 | 1/4" | 7/64" | 2" |
SCD-1964 | 5/16" | 1/8" | 2-1/8" |
SCD-1965 | 3/8" | 9/64" | 2-1/2" |
SCD-1966 | 7/16" | 3/16" | 2-3/4" |
SCD-1967 | 1/2" | 7/32" | 3" |
SCD-1968 | 5/8" | 1/4" | 3-1/4" |
SCD-1969 | 3/4" | 5/16" | 3-1/2" |
SCD-1970 | 7/8" | 11/32" | 3-5/8" |
SCD-1971 | 1" | 3/8" | 3-3/4" |
H.S.S. STANDARD TYPE (M.M)
ITEM NO. | DIA. BODY | DIA. PILOT | TOTAL LENGTH |
---|---|---|---|
SCD-1981 | 3.15 mm | 1.00 mm | 31.5 mm |
SCD-1982 | 3.15 mm | 1.25 mm | 31.5 mm |
SCD-1983 | 4.00 mm | 1.60 mm | 35.5 mm |
SCD-1984 | 5.00 mm | 2.00 mm | 40.0 mm |
SCD-1985 | 6.30 mm | 2.50 mm | 45.0 mm |
SCD-1986 | 8.00 mm | 3.15 mm | 50.0 mm |
SCD-1987 | 10.00 mm | 4.00 mm | 56.0 mm |
SCD-1988 | 12.50 mm | 5.00 mm | 63.0 mm |
SCD-1989 | 16.00 mm | 6.30 mm | 71.0 mm |
SCD-1990 | 20.00 mm | 8.00 mm | 83.0 mm |
SCD-1991 | 25.00 mm | 10.00 mm | 103.0 mm |